Enforcer 120 3 WATT

MSRP: $299.00
Was: $184.99
Now: $99.99
(You save $199.01 )
(5 reviews) Write a Review
SKU:
E-120
Condition:
New
Availability:
Usually ships within 10 business days.
Weight:
5.50 LBS
Shipping:
$17.50 (Fixed Shipping Cost)

ENFORCER 120

 

 

 

 

The Enforcer 120 Series will provide the maximum needed lighting to the front or rear deck of your vehicle. The Enforcer 120 Interior Lightbar included 2 separate sections measuring 17.5 inches long. Each section is equipped with 5 TIR 4 modules loaded with 3 Watt leds resulting in a maximum output of 120 watts of pure warning power! Each section is attached to your existing vehicle visor mounts using the provided bracket kit consisting of 4 U brackets 2 narrow slotted brackets and 2 wide slotted brackets. The Enforcer 120 interior visor lightbar has 15 flash patterns including Traffic Advisor functions of LEFT RIGHT and CENTER OUT.

 

The Enforcer 120 is ready for use straight from the box with roughly 20 inches of cable connecting the two sections and a disconnect plug to separate the sections for ease of installation, approximately 9 feet of power cable with ON/OFF switch and Flash Pattern Selector.

NOTE: THIS PRODUCT IS CONSTRUCTED WITH AN EXTENDED SHROUD ON BOTTOM AND WILL NOT WORK ON FLAT WINDSHIELD VEHICLES

 

Features:

 

  • 15 Flash Patterns
  • Traffic Advisor   LEFT RIGHT CENTER 
  • 3 Watt LED's
  • Power Plug with ON/OFF Switch and Flash Pattern Selector Switch

Dimensions: 17.5" L 1.5" T

 

Installation: 

Utilizing the provided brackets sent with your Enforcer 120

  1. Loosen screws to existing Sun Visor Mounts
  2. Locate the U shaped Brackets
  3. Use the SHORT U Bracket for the Outside (Closest to Door, "A" Post)
  4. Use the LONG U Bracket for the inner (Closest to the Rear View Mirror)
  5. Locate one WIDE and one NARROW Bracket
  6. Attach WIDE Bracket to the bracket mounted by the door or A Post with provided screw
  7. Attach NARROW Bracket to the bracket mounted closest to the Rear View Mirror with provided screw
  8. Disconnect both light sections from each other using the plug
  9. Place section on top of bracket and place screw in bottom of each bracket
  10. Adjust both Height and LEFT TO RIGHT  using the brackets and adjusting screws 
  11. Repeat process for other section

BE SURE AND LEAVE US YOUR REVIEW OF THE ENFORCER 120 INTERIOR VISOR LIGHTBAR

1 YEAR

5 Reviews Hide Reviews Show Reviews

  • 4
    great light for the money

    Posted by richard reynolds jr on 13th Jul 2017

    great light, install was easy with a few modifications to the brackets.

  • 5
    great light

    Posted by richard reynolds jr on 11th Jul 2017

    well made and bright even in direct sun. only flaw was the mounting brackets, had to modify. but overall great product.

  • 4
    Enforcer 120

    Posted by Kris B on 16th May 2017

    Great light bar for the price. It is bright and has a good selection of flash patterns. Only downfall for me was the brackets wouldn't work in my truck, had to make my own mounting brackets.

  • 5
    Moves traffic!

    Posted by *** on 6th Mar 2017

    These are the best for clearing traffic with minimal flash back

  • 5
    Bright

    Posted by Joe on 6th Mar 2017

    Extremely bright and easy to mount